FIBC Jumbo BagsType B Bulk Bags
Low breakdown-voltage fabric that prevents propagating brush discharges when handling dry powders.
FIBC Jumbo Bags
Type A FIBC Bulk Bags
Standard woven polypropylene bulk bags for dry, non-flammable materials: strong, economical and fully customisable.
- Safe working load: 250 – 2,000 kg
- Safety factor: 3:1 / 5:1 / 6:1 / 8:1
- Fabric: 60 – 240 GSM PP
Overview
About Type A Bulk Bags
A Type A FIBC (Flexible Intermediate Bulk Container) is made from plain woven polypropylene fabric with no electrostatic protection. It is the most widely used and cost-effective bulk bag type, suited to industries where neither the product nor the surrounding environment carries any flammable or explosive hazard. Type A bags are available with safe working loads from 250 kg to 2,000 kg and safety factors of 3:1, 5:1, 6:1, 8:1.
Each bag is made from 100% virgin polypropylene yarn, woven to the specified fabric weight (60–240 GSM, with 15–35 GSM lamination where required) and stitched with high-tenacity UV-stabilised thread. Bags are tested for fabric tensile strength, seam strength, top lift and drop performance, so they perform consistently under real transport and storage conditions.
Type A bags are approved only for materials with a Minimum Ignition Energy (MIE) above 1,000 mJ in non-flammable atmospheres. They must never be used with flammable powders, solvents or gases, or where explosive dust clouds may form. For those conditions, Type B, C or D bags are required.
Key features
Why choose our Type A Bulk Bags
01
Most economical bulk bag
Plain woven polypropylene with no static-control additives keeps cost low for everyday dry bulk handling.
02
High load strength
Safe working loads from 250 kg to 2,000 kg with safety factors of 3:1, 5:1, 6:1, 8:1 for demanding applications.
03
Virgin polypropylene
100% virgin PP yarn woven to 60–240 GSM and sewn with high-tenacity UV-stabilised thread.
04
Load-tested quality
Fabric tensile, seam strength, top-lift and drop checks confirm consistent performance.
05
Clear labelling
Each bag carries its SWL rating, safety factor, batch number and date of manufacture.
06
Outdoor and export ready
UV-stabilised fabric protects contents in outdoor storage, and PE liners keep out moisture during sea freight.
Build options
Construction & configuration options
Every bag is made to order — choose the construction, loops, top and bottom that suit your filling and discharge equipment.
Construction
- 4-Panel – Four separate panels stitched together form a rigid, stable rectangular bag, ideal for sand, cement, aggregates and minerals.
- U-Panel – One U-shaped panel forms two sides and the base, with two side panels added, reducing seams and stress points.
- Circular – A seamless woven tube with separate top and base panels gives uniform strength and is the most cost-efficient construction.
- Baffle – Internal corner baffles keep the bag square even when partly full, maximising pallet and container space.
- Net Baffle – Mesh corner baffles keep the square shape while allowing airflow for perishable, biomass and moisture-sensitive materials.
- 30% Extra Capacity – A modified baffle design that adds up to 30% more fill volume on the same base footprint.
Lifting loops
- Corner loops – stitched into each of the four corner seams; the most widely used option, spreading load evenly and suiting forklift tines and crane hooks.
- Cross-corner loops – stitched diagonally across each corner so the top stays open when the bag is suspended for filling or emptying.
- Double stevedore – two straps threaded through all four loops, letting forklift tines enter from either side.
- Single stevedore – one strap through all four loops, so the bag can be lifted from any side without repositioning.
- Sleeve lift – loops made from the bag fabric itself, giving a wider contact area for forklift tines; suited to very heavy loads and repeated use.
Top (filling)
- Open top – the full top is open for chute, conveyor or direct filling; fastest and most economical for grains, sand and coarse powders.
- Baffle (flap) top – a fabric flap folds over the opening after filling for basic dust and contamination protection.
- Spout top – a central fill spout for controlled, low-dust filling; tied closed after filling.
- Spout top with flap – a spout plus a cover flap for extra containment and tamper evidence.
- Conical spout top – a high-fill cone that guides material in and reduces spillage and dust on automated lines.
Bottom (discharge)
- Plain (flat) bottom – no discharge mechanism; emptied by cutting or tipping in a single operation.
- Discharge spout – a central tubular spout for controlled, clean discharge; the most common industrial option.
- Conical discharge spout – a tapered outlet that prevents bridging and leaves minimal residue.
- Discharge spout with flap – an extra security flap protects the closed spout and provides tamper evidence.
- Duffle bottom – a full-width opening for very fast, complete gravity discharge of free-flowing materials.
Applications
Industries & materials
Agriculture & grain
rice, wheat, maize, barley, pulses, lentils, seeds, organic fertilisers
Construction
sand, cement, fly ash, crushed stone, gravel, aggregates, demolition waste
Chemicals (non-flammable)
plastic granules, mineral pigments, calcium carbonate, non-explosive silica, sodium sulphate
Landscaping & horticulture
compost, peat, mulch, bark chips, potting soil, perlite
Mining & minerals
limestone, gypsum, kaolin, bentonite, talc, mineral sands
Made for you
Customisation options
- Construction type: U-Panel, Circular, 4-Panel, Baffle, Net Baffle or 30% Extra Capacity
- Loop design, top filling and bottom discharge configuration
- Fabric weight from 60 to 240 GSM; lamination 15 to 35 GSM
- Safe working load and safety factor (3:1, 5:1, 6:1, 8:1)
- PE liner or coextruded barrier film liner
- Custom dimensions
- Printing in 1–4 colours
FAQ
Type A Bulk Bags — questions answered
01What is a Type A FIBC bulk bag?+
It is a standard bulk bag made from plain woven polypropylene with no electrostatic protection. It is used for dry, non-flammable materials where neither the product nor the environment presents a flammable or explosive hazard.
02What materials can go in Type A bags?+
Any dry, non-flammable, flowable material: grain, sand, cement, aggregates, mineral powders, calcium carbonate, plastic granules, fertilisers, compost and non-reactive chemicals. They must not be used with flammable powders or in explosive atmospheres.
03How is Type A different from Type B?+
Type A has no electrostatic protection. Type B uses fabric with a breakdown voltage below 6 kV to prevent propagating brush discharges, making it suitable for dry flammable powders (MIE above 3 mJ) in non-flammable atmospheres.
04What safe working loads are available?+
From 250 kg to 2,000 kg, with safety factors of 3:1, 5:1, 6:1, 8:1. Each bag is labelled with its SWL, safety factor and batch details.
05Can Type A bags be customised?+
Yes. Dimensions, fabric weight, SWL, safety factor, construction, loops, top and bottom configuration, liner and 1–4 colour printing can all be specified.
Related products
You may also need
FIBC Jumbo Bags
FIBC Jumbo BagsType C Bulk Bags
Conductive, groundable bags woven with conductive threads for flammable powders and sensitive areas.
FIBC Jumbo BagsFood Grade Bags
Hygienically made bulk bags of 100% virgin polypropylene with food-safe liners, for grains, sugar, flour and other food products.
Get a free quote
Need bulk bags for your business? Let’s talk.
Share the product, quantity and size — we will suggest the right bag and send you a quote quickly.